Split System Installation Mount Dandenong

Split System Install in Mount Dandenong

There’s nothing more satisfying than coming home to a day and switching on your split system air conditioning and in just a couple of minutes your house and your family are cool.

Split system air conditioning offers this versatility, making them hard to beat. But like all heaters and coolers, to ensure they are operating to their maximum it is essential to have them maintained and maintained in a professional manner by qualified professionals. Gas Heating Melbourne offers experienced technicians who know your split system air conditioners inside and out. They specialize in all brands and models of these units giving you the peace of mind that we can get the job done to professional standards.

We offer a variety of services that include the following:

• Split System Installation Mount Dandenong
• Split System Repairs
• Split System Servicing

Our team of professionals in the field of heating and cooling are fully qualified and licensed to complete all types of work. If you’re in search of [keywords lower] Mount Dandenong services then contact Local Heating and Cooling Professionals Mount Dandenong today and talk with one of our friendly team members.

How Do Split Systems Operate?

Air conditioning splits get the name because of one half of that system (condenser) located outside the house while the other part (fan coil) is installed inside. While cooling, warm air in the room is brought in by the fan coil, and then removed, resulting in cool air flowing back into the house. While reverse cycle allows for that the heating system to run in reverse, providing heating on cold winter days.

Systems for split air conditioners are installed in individual rooms, areas or even multiple rooms connected by copper piping into an outdoor unit (condenser). Multiple-headed split-air conditioning units can be used in up to nine rooms, with just one outdoor unit and allowing for separate temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend to use for Split Systems is Mitsubishi Electric. If you are looking for the Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular cooling and heating throughout the summer and winter seasons The annual operating cost would be $272.34.

Lowering the Split System Operating Costs

It doesn’t take much to cut down on your operating costs by using the Split System. Depending on the model you purchase, and it’s respective star rating will determine how much you will save each year. However looking beyond the initial cost to the way you utilize Your Split System can help as well.

Guide to Operating Split Systems

• Set the thermostat between 24C and 26C to cool. Any degree lower than that will increase the running costs by approximately 10%..
• Make use of the economy setting in the event that your split system is equipped with one. Also, you should regularly check the condition of your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains and blinds during the daytime. Close doors and windows to areas being cooled when the split system is in operation.
• When the split system is turned off and the cooler is outside, open the doors or windows and let cool air circulate.
• Insulate your property to help keep cool summer air out and keep the heat inside during winter.
• Dress to suit the weather conditions.

Why Choose Split Systems?

Split air conditioners mounted on walls are the most frequently used air conditioning systems for homes because they’re affordable and simple to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year since it keeps the temperature at a constant level, reduces costs (less energy use) and creates a lot less noise when utilized. This is achieved through controlling the compressor rotation speed more precisely.

Affordable

Wall mounted Split AC systems are the most cost-effective option for a single room, apartment or small house because they are relatively inexpensive to buy (depending on how many indoor units you will require) and they don’t require necessary duct work.

Independent Temperature Control

Each indoor unit has the ability to control the room that it is situated in, so each room may have different temperature.

Air Quality

A lot of split air conditioning systems feature air filtering and humidity control features that control the amount of dust and humidity within the room. This can provide those with sensitive conditions (children older, asthmatic, or allergic users) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow different indoor units to connect to one outdoor condenser, which in turn gives you satisfaction of having the ideal AC (in terms of output and physical limitations) to a specific space.

Split System FAQ

Are split systems the same as one would expect from an air conditioner?

Yes, Split System includes an air-conditioning unit. However, there are different kinds of air conditioning systems. These includes;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

Each of these systems operates on electricity & refrigerant under the same principle, but are different in terms of installation.

How long does it take to install a split system air conditioner?

In general the typical split air conditioning system installation is expected to take between 3-6 hours. But, the exact amount of time will depend on various factors like the following:

• Dimensions and position of both outdoor and indoor unit
• The copper pipes are routed between the outdoor unit and indoor unit
• Electrical connections from main switchboards to A/C unit

More Split System FAQ's

Do I need to replace or fix my cooling system?

In the majority cases in the event that your air conditioner is over > 10 years and you have obvious issues with your AC there’s a good chance that it’s cheaper to replace rather than fix.

To assist you in making the right choice for your needs, consult with the staff at ComfyHome for an honest and accurate assessment of the state of your air conditioner.

What size of split system air conditioning will I require?

The standard measurements ratio is multiple the area of the room by a ratio of 0.15 to obtain the required power of the measurement unit in kilowatts.

For a room area of 40 square metres, you’ll have a Split system air conditioning unit with 6 kW. A unit that can cool the air at 2.5kW is suitable for 10 -20 sqm room areas.

However, the amount of the Split system’s air conditioning can also be affected by other variables such as the insulation of the room, the size of the room, and’ position.

To get an accurate estimate of the needed Split units size we recommend you get in touch with us to request a thorough analysis.

More Split System FAQ's

What is the longest a split system air conditioner last?

In general, an air conditioner is built to last from 10-20 years on an average. But it depends on heaps of things like the model of the AC and the quality of the installation, regular service history, and more…

It is vital to check the maintenance of the Split System air conditioner regularly to extend its life and increase effectiveness.

When should I wash my air conditioner’s air filter?

Based on Daikin Australia, it is highly recommended that you take care to clean your air conditioning filter every two weeks to improve the system’s efficiency and potentially decrease your energy use by 5 to 15 15%.

Mount Dandenong Gas Heating Services

• Gas Log Fire Service & Repairs Mount Dandenong
• Gas Hot Water System Installation & Repairs Mount Dandenong
• Gas Appliance Servicing & Repair Mount Dandenong
• Carbon Monoxide Testing Mount Dandenong
• Ducted Gas Heating Servicing & Repair Mount Dandenong
• Braemar Ducted Gas Heating Servicing & Repair Mount Dandenong
• Gas Heating Repairs Mount Dandenong
• Mount Dandenong
• Evaporative Cooling Repair Mount Dandenong
• Vulcan Ducted Gas Heating Servicing & Repair Mount Dandenong
• Brivis Ducted Gas Heating Servicing & Repair Mount Dandenong
• Gas Heating Installation Mount Dandenong
• Gas Space Heater Repair Mount Dandenong
• Gas Heating Service Mount Dandenong

What Types of Systems We Service & Repair

Each type and brand of heating comes with its own operation and maintenance Our experienced technicians have the insight and expertise to provide top-quality services to all systems of heating for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in the field of heating repairs and maintenance, specialising in all styles and models of heating systems. We are proud of our rapid response time and dedication to quality, efficiency and reliability.

We can service and maintain the major brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Quality Workmanship Guaranteed
• Great Reputation & Reviews
• We’re friendly, personable and polite.
• Professionally trained and licensed team
• Get a Free Quote and No Costs

Our Promise To You

At Gas Heating Melbourne we understand the difficulty of not having hot water. This is something we believe no one should be forced to endure. This is why we place top priority on hot water emergencies. All of our experienced plumbers are reliable and friendly We are able to assist you in any situation.

We are proud of our customer service and it is our conviction that the little things matter the most.

We take pride in our great customer service, here’s why our customers love us:

• We always arrive when we declare that we will.
• Our techs will give you a the number to call them when they are 30 minutes away.
• Price upfront, competitive and professional advice before we start the job.
• Always cleaning up after us.

At Gas Heating Melbourne offer emergency and maintenance services in plumbing, electrical, and heating. If at any time you are unsure about our services and the products we offer.