Split System Installation Selby

Split System Installation in Selby

There’s nothing better than arriving home on a hot 40-degree day, switching on your split system air conditioning and in a matter of minutes your house and your family are cool.

Split system air-conditioning provides this versatility, making them hard to beat. But , just like all heaters or coolers to keep them running at their best they must be maintained and serviced to the highest standard by qualified professionals. Gas Heating Melbourne offers experienced technicians who are familiar with split system air-conditioners inside and out. They specialise in all makes and models of these units offering you peace of mind that we will complete the task at a professional level.

We offer a wide range of services, which include the following:

• Split System Installation Selby
• Split System Repairs
• Split System Servicing

Our team of experts in heating and cooling are fully qualified and licensed for all sorts of jobs. If you’re looking for split system installation Selby services then contact Local Heating and Cooling Professionals Selby today and talk with one of our helpful team members.

How Do Split Systems Function?

Air conditioning splits get their name because of half the system (condenser) is located outside of the house , while the second part (fan coil) is installed inside. When cooling, the hot air that is inside the room is taken in via the fan coil before being is then removed, which results in cool air being recirculated back into the house. The reverse cycle permits the heat pump to run in reverse in order to provide warmth during cold days.

Split air conditioning systems can be installed in individual rooms, zones or rooms connected by copper piping into an outdoor unit (condenser). Multiple-headed split-air conditioning units are able to be fitted for more than nine rooms with only one outdoor unit, permitting separate temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the brands we recommend to use for Split Systems is Mitsubishi Electric. If you are looking for an Mitsubishi Electric GE Series 2.5KW Split System, installed in a small room providing regular heating & cooling during the winter and summer periods The annual operating cost would be measured at $272.34.

Reducing the Split System Operating Costs

It’s not difficult to lower your running expenses with a Split System. Depending on the model that you purchase, and the star rating will determine how much you can save annually. Beyond the initial price to how you use it Split System can help as well.

Tips For Operating Split Systems

• Set the thermostat between 24C and 26C to cool. Every degree lower in summer will increase your running costs by about 10%..
• Utilize the economy setting when your split has one. Also, you should regularly check the condition of your air conditioner.
• Make sure that the sun’s heat is kept out by closing curtains and external blinds in the morning. Close the doors and windows of areas that are being cooled while it is split on.
• When the split system is turned off and the cooler is outside, it is recommended to open the doors and windows to let the cool air inside.
• Insulate your house to block summer heat out and the cold inside in winter.
• Dress to suit the weather conditions.

Why Select A Split System?

Split air conditioners mounted on walls are the most commonly used residential air conditioning system since they are inexpensive and easily to maintain.

Inverter Technology

Inverter technology is the mainstay for comfort all through the year as it maintains an even temperature, helps save costs (less energy use) and produces a lesser amount of noise when utilized. This is achieved by control of the compressor’s rotation speed more precisely.

Affordable

Wall mounted divided AC models are most budget option for a small room, apartment or small house since they are inexpensive to buy (depending on the number of indoor units you need) and they don’t require duct work required.

Independent Temperature Control

Each indoor unit is able to control the area it is installed in, thus each room may have different temperature.

Air Quality

Many HVAC systems that are split feature air filtering and humidity control functions that regulate the amount of dust and humidity inside the space. This allows for sensitive customers (children, elderly, asthmatic or allergic people) an ease of mind and body.

Multi-Head Split Systems

Multi-Head Split Systems permit multiple indoor units to be connected to one outdoor condenser, which provides satisfaction of having the perfect cooling system (in terms of output and physical constraints) for a particular room.

Split System FAQ

Is a split system similar to the air conditioning?

Sure, Split System is an air conditioning system. But, the different types of air conditioning system include;

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Ducted refrigerated air conditioner

All of them operate by using refrigerant and electricity. They all operate on the same principle but they are different in terms of how they are installed.

How long will it take to install a split system air conditioner?

Generally speaking an individual split-system air conditioner installation will take 3-6 hours. However, the exact amount of time will depend on various factors like below:

• The size and location of both indoor and outdoor unit
• Copper pipes that are routed between outdoor and indoor units
• Electrical connections from main switchboard up to the AC unit

More Split System FAQ's

Should I replace or repair my air conditioner?

In the majority of situations in the event that your air conditioner is more than 10 years old and you notice obvious issues with your AC, there is a good chance that it could be more affordable to replace than repair.

To assist you in making the right decision To make the right choice, consult with the staff at ComfyHome to provide you with an honest opinion on the condition of your air conditioner.

What size of split system air conditioner will I require?

A standard measure ratio would be to multiply the size of the room by a factor of 0.15 to calculate the necessary power of the device in kilowatts.

For a room with a size that is 40 sqm, you’ll require a split system air conditioning unit with 6 kW. A unit that can cool the air at 2.5kW is the ideal size for 10-20 square meter room spaces.

However, the amount of the Split system’s air conditioning will also be affected by other variables such as the room insulation, amount of people residing there and’ position.

To get an accurate estimate of the necessary Split dimension, we suggest you contact us for a detailed analysis.

More Split System FAQ's

How long will an air conditioner split system last?

In general, an air conditioner is built to last 10-20 years on average. But this depends on a lot of things like the model of the AC, quality of the installation, regular service history, and more…

It is crucial to maintain the Split System air conditioner on a regular basis to extend its life and increase effectiveness.

Do I need to clean my air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended to cleanse your air conditioning filters every 2 weeks to increase the system’s efficiency and potentially reduce your energy usage by 5 to 15%.

Selby Gas Heating Services

• Gas Appliance Servicing & Repair Selby
• Gas Heating Selby
• Gas Heating Installation Selby
• Gas Space Heater Repair Selby
• Gas Log Fire Service & Repairs Selby
• Gas Heating Service Selby
• Gas Hot Water System Installation & Repairs Selby
• Vulcan Ducted Gas Heating Servicing & Repair Selby
• Evaporative Cooling Repair Selby
• Braemar Ducted Gas Heating Servicing & Repair Selby
• Ducted Gas Heating Servicing & Repair Selby
• Brivis Ducted Gas Heating Servicing & Repair Selby
• Carbon Monoxide Testing Selby
• Gas Heating Repairs Selby
• Selby

What Types of Systems We Service & Repair

Each type and brand of heating requires its own operation and maintenance Our experienced technicians are knowledgeable and know how to provide first rate services to all systems of heating, including:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team has many years experience in the field of heating repairs and maintenance, specialising in all styles and brands of heating systems. We pride ourselves on having a quick response time and commitment to efficiency, excellence and reliability.

We are able to maintain and service all leading brands of heating systems and units that include:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• Price Up-Front, No Hidden Fees
• Competitive Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Excellent Reviews & Reputation
• We’re Personable & Friendly
• A Team of Experienced and Licenced Professionals
• Get a Free Quote and No Obligation

Our Promise To You

We at Gas Heating Melbourne we understand the discomfort of not having hot water and it’s something we believe no one should have to experience. This is why we put the highest priority on hot water emergencies. Our plumbers are reliable and friendly, without a doubt we are able to assist with any emergency.

We pride ourselves on our customer service and it is our firm belief that the small things count the most.

We pride ourselves on our excellent customer service. Here’s why our clients love us:

• We always arrive when we tell you we will.
• Our technicians will give you the number to call them when they are 30 minutes away.
• Upfront competitive pricing and advice prior to the start of the project.
• Always taking care to clean up after ourselves.

The staff at Gas Heating Melbourne offer emergency and maintenance services in plumbing, heating, and electrical. If you have some questions about our services and the products we can provide.